Tags:
create new tag
view all tags

Battery Booster Pack for Mobile Robots P3-AT

Intro

This project started as a way to support the need for more power longevity during testing and as a way to utilize batteries several sizes too large that were accidently ordered. The batteries used for this pack were three 12V 12AH Lead Acid Casil Batteries about 4” by 6”. While these batteries were several inches too large to fit in to the robot itself, the voltage and current were compatible enough that they could easily be added in parallel to the standard batteries used.

IMG_8968.JPG

The Mount

In order for the batteries to be easily added to the bot without interfering with functionality or taking up the valuable real estate the top of the bot offers, a mount had to be constructed. For this mount we decided to use angle iron as the main material and nuts and bolts as the fasteners. These materials were chosen because of the ease with which they can be used for construction and the strength they'll provide in the face of the somewhat weighty batteries. The dimensions of the base are: 13.5" wide x 9.25" long x 5.5" tall. The battery rails are 7.25” long and 4”apart with a flat bar attached underneath the rails for extra support.

Battery_Mount.jpg

The Wiring

IMG_8366.JPG IMG_5181.JPG

For the wiring we used two strands of size 8 electrical wire twisted together and soldered to bared female spade connectors, wrapped in electrical tape. Each section of wire was connected by wire nuts.

The connector we used between the batteries and the bot itself was a standard RV connector.

IMG-20120628-00041.jpg

We cut the wires of the RV connector in the middle and connected the wires on the male end to the loose ends of the batteries’ wires with powerpole stackable connectors.

PowerPole_Connectors.jpg PowerPole_Connection_Between_Battery_wires_and_Rv_Connector.jpg

In order to connect the wires stemming from the female end to the bot itself we bared the wires and crimped those on to ring tongue connectors which we then screwed in to a positive (pictured left) and negative (pictured right) connection on the robot’s battery strip.

Negative_Terminal_on_Battery_Strip_in_Robot.jpg Positive_and_Negative_Terminals_on_Battery_Strip_In_Robot.jpgPostive_Terminal_on_Battery_Strip_in_Robot.jpg

The Entire Setup

Entire_Setup.jpg Mounted_Side_View.jpg Mounted_Top_View.jpg Mounted_Back_View.jpg

Testing

This booster pack more than doubled the life span of the robot during two phases of testing.

The first phase of testing consisted of infinitly looping through turns and direction changing. The robot was rasied on a box so that the teh wheels weer of the ground. Its left and right wheels moves in opposing directions for a set period of time and then changed directions until the battery was drained. Un-boosted the battery lasted about 4 hours, with the boosted the batteries lasted about 8 hours.

There is some room for error as the the the length of the boosted bot's test run required it to be stopped, turned off, and restarted during lab occupancy intervals.

The second phase of testing involved running a bot without the pack and bot with the booster pack in demo mode in an enclosed psace running object avoidance using the laser and sonar. The un boosted lasted roughly 2 hours while the boosted bot lasted roughly 4.5 hours.

Video of testing can be found in the included attatchments below labeled: "Testing_of_Booster_Pack"

Permissions

Persons/group who can view/change the page:

REMOVE the first line to allow this topic to be seen by all

-- (c) Fordham University Robotics and Computer Vision

Topic attachments
I Attachment History Action Size Date Who Comment
JPEGJPG 50724960895__DD1561E6-2030-4443-9D73-A281DFE0EECE.JPG r1 manage 1888.9 K 2017-07-07 - 18:57 MaggieGates mount + batteries
JPEGjpg Battery_Attachments.jpg r1 manage 4726.2 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg Battery_Mount.jpg r1 manage 2113.9 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg Entire_Setup.jpg r1 manage 5293.6 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGJPG IMG_5181.JPG r1 manage 1911.7 K 2017-07-07 - 19:00 MaggieGates wiring
JPEGJPG IMG_8366.JPG r1 manage 1846.2 K 2017-07-07 - 18:59 MaggieGates  
JPEGJPG IMG_8968.JPG r1 manage 2144.4 K 2017-07-07 - 18:52 MaggieGates Battery used
JPEGJPG IMG_8969.JPG r1 manage 1867.8 K 2017-07-07 - 18:52 MaggieGates Battery used
JPEGjpg Mounted_Back_View.jpg r1 manage 5256.8 K 2017-05-25 - 21:13 MaggieGates  
JPEGjpg Mounted_Side_View.jpg r1 manage 5167.7 K 2017-05-25 - 21:13 MaggieGates  
JPEGjpg Mounted_Top_View.jpg r1 manage 7149.4 K 2017-05-25 - 21:13 MaggieGates  
JPEGjpg Negative_Terminal_on_Battery_Strip_in_Robot.jpg r1 manage 5124.5 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg Positive_and_Negative_Terminals_on_Battery_Strip_In_Robot.jpg r1 manage 5183.4 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg Postive_Terminal_on_Battery_Strip_in_Robot.jpg r1 manage 5451.1 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg PowerPole_Connection_Between_Battery_wires_and_Rv_Connector.jpg r1 manage 4900.7 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg PowerPole_Connectors.jpg r1 manage 4285.5 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
JPEGjpg RV_Connector_Used.jpg r1 manage 6798.4 K 2017-05-25 - 21:10 MaggieGates Booster Pack Connections and Mount Photos
Unknown file formatm4v Testing_of_Booster_Pack.m4v r1 manage 29051.0 K 2017-05-25 - 21:16 MaggieGates Testing of Booster Pack
Edit | Attach | Watch | Print version | History: r7 < r6 < r5 < r4 < r3 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r7 - 2019-09-18 - LabTech
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2024 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback